Post by somratislam2 on Feb 15, 2024 6:40:41 GMT -5
Plate with a notched trowel. For large surfaces you can choose to extend a cord with the help of a spraying machine and place the insulating plates on it. Placement of insulating plates The plates rest on the starting profile, exerting a back-and-forth force to distribute the adhesive, then they are pressed with the help of the trowel. The plates are placed together. In case of applications with adhesive on the entire surface, the plates will be pressed directly with the trowel. The insulating plates are fixed to the support by means of adhesive and complementary mechanical fixation composed of plastic plugs with circular heads.
Placement of cornerbacks The corners must be protected with metal profiles, which serve to reinforce critical points and obtain verticality and uniformity. The use of corner posts with mesh is recommended. Press on the mesh to Kuwait Email List embed it in the mortar, and cover the mesh with another layer of mortar. Application of base mortar and reinforcing mesh The plates are coated with a first layer of mortar, called a base layer, approximately 1 to 2 mm thick. The mesh is placed on the base mortar, the fabric of which must penetrate through pressure into the first layer of fresh mortar.
The meetings between two meshes must overlap a minimum of 10 cm with the adjacent sections of mesh Application of the 2nd layer of mortar After the first layer of mortar has dried, a second layer is applied to completely cover the mesh. The approximate thickness of the 2 layers will be 4 mm. After some drying time, wipe with a sponge or trowel to leave the surface smooth. Primer and topcoat Once the 2nd layer of mortar has been applied, wait 24 hours and apply the primer whose functions are: Avoid high absorption of the finishing mortar Create an adherent bridge of the final finish.
Placement of cornerbacks The corners must be protected with metal profiles, which serve to reinforce critical points and obtain verticality and uniformity. The use of corner posts with mesh is recommended. Press on the mesh to Kuwait Email List embed it in the mortar, and cover the mesh with another layer of mortar. Application of base mortar and reinforcing mesh The plates are coated with a first layer of mortar, called a base layer, approximately 1 to 2 mm thick. The mesh is placed on the base mortar, the fabric of which must penetrate through pressure into the first layer of fresh mortar.
The meetings between two meshes must overlap a minimum of 10 cm with the adjacent sections of mesh Application of the 2nd layer of mortar After the first layer of mortar has dried, a second layer is applied to completely cover the mesh. The approximate thickness of the 2 layers will be 4 mm. After some drying time, wipe with a sponge or trowel to leave the surface smooth. Primer and topcoat Once the 2nd layer of mortar has been applied, wait 24 hours and apply the primer whose functions are: Avoid high absorption of the finishing mortar Create an adherent bridge of the final finish.